Skip to main content
FREE Delivery!|Get a quote

Landscaping material calculators for Hawaii

Take your measurements, then calculate the amount to order. Use this quick estimator or visit the calculator for your chosen material to find depth recommendations, coverage information, and examples.

Free delivery on every orderacross Hawaii served✓ Delivery in as fast as 2 business days

Add project measurements

ft
Enter a length greater than 0
ft
Enter a width greater than 0
ft
Enter a diameter greater than 0
in
Enter a depth between 0.25 and 24 inches
Add 5% extra for compaction & spillage

One cubic yard measures 3 x 3 x 3 feet. Bulk materials are sold by that cube or by the ton, so ordering starts with converting the size of your project into one of those units. These calculators make that conversion for 24 materials, using each material's actual weight per cubic yard. Shredded mulch is about 600 lb per yard, while crusher run is 3,000 lb per yard. The cube is the same size, but its weight can be five times greater. That is why material-specific calculations provide a better tonnage estimate than a general aggregate tool.

Pick a material

Calculation method

Start with the footprint: multiply length by width in feet. Multiply that result by the depth in feet, with inches divided by 12, to get cubic feet. Divide by 27 to find cubic yards, then multiply the yards by the material density for tons.

Cubic yards = (Length ft × Width ft × Depth in ÷ 12) ÷ 27
Tons = cubic yards × density (0.3 for mulch, up to 1.55 for riprap)

Project depth can change the amount more than most people expect. For example, a 10 x 10 patio filled to 2 inches takes half the stone needed at 4 inches. If you have not chosen a depth, look at the recommended project depths on the material page first.

24 materials, side by side

Calculator estimates are based on the figures in this chart. It can also help when comparing material options or looking over a quote from another yard:

MaterialWeight per yd³Tons per yd³Typical depth1 yd³ covers at 3"Sold by
Driveway / walkway gravel≈ 2,800 lb1.402–4" (6" new drive)108 sq ftTon
Pea gravel (3/8")≈ 2,800 lb1.402–3"108 sq ftTon
Crushed stone #57 / 3/4"≈ 2,800 lb1.402–4"108 sq ftTon
Crusher run / road base≈ 3,000 lb1.504" compacted108 sq ftTon
River rock (1–3")≈ 2,700 lb1.352–4" by size108 sq ftTon
Mason / washed sand≈ 2,700 lb1.351–6" by use108 sq ftTon
Topsoil (screened)≈ 2,200 lb1.102–6"108 sq ftYard
Garden soil (blended)≈ 2,000 lb1.004–12" by bed108 sq ftYard
Fill dirt≈ 2,400 lb1.20as needed108 sq ftYard
Shredded mulch≈ 600 lb0.302–3"108 sq ftYard
RipRap / armor stone≈ 3,100 lb1.5512"+ layersn/aTon

Choosing material for your project

  • For a driveway or parking pad, figure road base or crusher run as the lower course, then calculate #57 stone or driveway gravel for the finish layer. Calculate the two layers separately.
  • For ponding water, a wet trench, or a French drain, plan on clean #57 or drain rock at 12 inches or more.
  • Put shredded mulch in planting areas. For a border with no refresh needed, choose river rock.
  • Thin or bare lawn areas need 4 to 6 inches of screened topsoil before laying sod or putting down seed.
  • Use fill dirt to bring up the grade or fill a hole, then reserve topsoil for the upper 4 to 6 inches.
  • A paver patio uses a compacted base topped with exactly 1 inch of bedding sand. Use the Paver Base and Paver Sand calculators to estimate each layer separately.
  • Playground fall zones: maintain pea gravel at a depth of 9 to 12 inches.
  • For a washing-out bank or shoreline, install riprap over fabric in 12-inch-plus layers.

Moving from an estimate to delivery

The materials above are offered by Hawaii Rock Supply. Every order in Hawaii includes free delivery, often within 2 business days. Calculate the amount, use the calculator link to open the product page, and check out. You can also share your measurements through our contact form and get help with the calculation.

Common ordering questions

What calculator do I need?
Pick the calculator for the material you intend to purchase, as its estimate is based on that material's actual weight. To compare pea gravel and river rock for a path, enter the same dimensions in each calculator. Volume is unchanged, but the tonnage and price are different.
Cubic yards or tons?
Follow the unit shown on the product page. Gravel and stone sell by the ton, while soils and mulch sell by the yard. The calculators display both, so there is no need to do the conversion yourself.
How close are calculator estimates?
Calculations are precise, but site conditions vary. Moisture, compaction, and an uneven subgrade may change the amount required by about 10 to 15%, so estimates are shown as a range and crushed products include a small default allowance. Measure carefully twice to help stay within it.
Can several materials arrive in one delivery?
Yes. For base stone with surface gravel, fill dirt with topsoil, or mulch with edging rock, estimate every layer in its own calculator and put the products in one order. Delivery remains free.
Are the calculator materials available for purchase?
Yes, all 24 materials can be ordered. Each calculation result takes you to its matching product page with your calculated quantity.

Your price includes free shipping

All 24 calculator materials are in stock, with free delivery across Hawaii.

Shop all products